In order to represent the ductile tensile behaviour of steel fibre reinforced concrete (SFRC), the Diverse Embedment Model (DEM) was recently developed, accounting for both the random distribution of fibres and the pull-out behaviour of fibres. Although the DEM shows good agreement with test results measured from uniaxial tension tests, it entails a double numerical
The tensile stress-strain response of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) is a basic constitutive property, and reliable knowledge of this response is necessary for appropriate application of the tensile-carrying capacity of such advanced cement materials. Reference tests methods like direct tensile tests which aim at assessing this property, have found limited application due to
Three-point bending tests on notched beams of steel fiber-reinforced concrete (SFRC) have been conducted using both a servo-hydraulic machine and a self-designed drop-weight impact device. The shape and geometry of the specimen followed the RILEM recommendation, i.e., 150 mm × 150 mm in cross section, 700 mm in length, notch-depth ratio was around 1/6 and
A multiscale oriented approach to the analyses of steel fiber reinforced concrete materials and structures is proposed. At the micro level, the pullout behavior of a steel fiber embedded in con- crete matrix, either straight or with hooked end, with or without inclination to the loading direction, is investigated by means of analytical or numerical
Adding sufficient quantities of steel fibers to concrete has long been known to transition a relatively brittle material to a relatively ductile one. That transition is made possible by a number of well known toughening mechanisms including, fiber-matrix debonding and pull-out, additional matrix cracking, as well as fiber bending and fracture. In the work here,
This paper introduces the meso-scale modeling of fiber reinforced concrete under mixed mode fracture. Fibers and matrix are modeled separately in this model, and each fiber is randomly arranged within the specimen models. The feature of this analytical model is to evaluate fiber resistance against shear deformation across the crack plane by calculating the pullout
The development of bending cracks in fibre reinforced concrete (FRC) beams with main rein- forcement bars is modelled applying the fictitious crack model. A beam subject to bending moment and nor- mal force is modelled. Closed form solutions are given for the bending moment and crack opening, spacing and length; all functions of the cross-sectional
An experimental study was carried out to compare mechanical performance of two types of precast tunnel lining segments. First, classical reinforced concrete (RC) segments were loaded up to failure in a configuration corresponding to the critical in situ laying loading. Then, full-scale experimental specimens of steel fibre reinforced concrete (SFRC) segments were tested in the
For the design of SFRC members, the most fundamental material property is its post cracking residual tensile strength. When relying on physical models to describe structural behaviour under load, the material laws must first be accurately established. If the material laws either significantly over- or under-estimate the residual tensile capacity of the SFRC, an accurate