Fracture Mechanics Fundamentals

This text briefly introduces the content in the page.

Acomparisonintensionsofteningcurves obtained byauniaxialtensiontest anda3-pointbending testwithaninverseanalysis

In order to obtain tension softening curves, the authors carried out both the uniaxial tension test and the 3-point bending test with different types of concrete: normal concrete, highly-flowable concrete and high-early-strength concrete. For the uniaxial tension test, a specially designed gear system was adopted for avoiding secondary flexure. For the 3-point bending test, inverse

Onregularizedplasticitymodelsforstrain-softeningmaterials

a basic nonlocal plasticity model with a nonlocal cumulative plastic strain in the softening law provides only a partial regularization. As an alternative, a refined nonlocal plasticity model with a combination of local and nonlocal cumulative plastic strain is investigated in detail. An efficient numerical algorithm solving the nonlocal consistency condition is outlined and a

SizeEffectinHardenedCementPasteandHighStrengthConcrete

This paper will report on an experimental investigation into the size effect in the strength of Dardened cement paste (HCP, nominal compressive strength 40 MPa) and high strength concrete (HSC, mminal compressive strength 110 MPa) as measured in three point bending. The aim of the investigation is to judge the range of applicability of the

SizeEffectsQuasibrittleFracture:ApercuofRecentResults

The paper consists of two parts. In view of length limitations, and because several comprehensive reviews behind the present lecture were already published in journals, the first part is limited to listing various recent advances that a.re surveyed in the conference lecture. The second, much er, pa.rt then complements this survey by presenting in mathematical

NonlocalWeibulltheoryandsizeeffectinfailuresatfractureinitiation

If the structure fails at fracture initiation from a smooth surface, and if the geometry is positive and the structure size tends to infinity, the Weibull-type size effect must be exactly followed, even if the material is quasibrittle. A nonlocal generalization of Weibull theory that satisfies this condition is presented. It predicts the probability of

Strongembeddeddiscontinuitiesforsimulatingfractureinquasi-brittlematerials

Instituto Superior Tecnico, Lisboa, Portugal 2Koiter Institute Delft I Delft University of Technology, Delft, The Netherlands In this paper embedded strong discontinuities are used to model discrete cracking in materials like concrete. In the approach followed a discontinuous displacement field is considered and the deformation is localized at a surface of zero width. Both a

Fractureprocesszoneinhighstrengthconcrete

An experimental investigation on the influence of maximum size of coarse aggregate, cement and coarse aggregate contents on the size of fracture process zone (FPZ) in high-strength concrete (HSC) is reported. Wide ranges of concrete mixes were designed to vary the compressive strength of concrete between 55 MPa and 80 MPa. Three different maximum sizes

Behaviorofplainconcretesubjectedtotensileloadingathighstrain-rate

The results obtained dudng a testing program for tensile behavior over a large range of strain- 6 1 rates (10- to 10 s- ) are summarized in this paper. The tests have been performed on cube specimens of 200 mm and 60 mm sides with aggregates of 5, 10 and 25 mm size. The high

Draft ontheJCIStandardTestMethodforDeterminingTensionSofteningProperties ofConcrete

Y.Uchida Gifu University, Gifu, Japan H.Mihashi & Y.Kaneko Tohoku University, Sendai, Japan S.Nakamura Utsunomiya University, Utsunomiya, Japan N.Kurihara Musashi Institute of Technology, Tokyo, Japan ABSTRJCT: In this pap~r, draft on the standard test method for determining tension softening properties of concrete is proposed. T~1s test method evaluat.es the t~nsion softening diagram of concrete by analyzing

Do you want to boost your business today?

This is your chance to invite visitors to contact you. Tell them you’ll be happy to answer all their questions as soon as possible.