Fracture Mechanics Fundamentals

This text briefly introduces the content in the page.

A First Approach to Comparing Cohesive Traction-Separation Laws for Concrete

In the already vast literature dealing with numerical simulations of fracture of concrete elements or structures, a large number of papers deal with cohesive traction-separation laws. How- ever, in many instances, this appears to be a secondary aspect of the published studies, the principal one being the variant of the numerical algorithm being presented in

Effect of softening function type in double-K Fracture Model: Alkali-activated fly ash mortar with hemp fibres

The aim of research reported in this paper is to quantify fracture parameters of selected mortars prepared with an alkali-activated binder and hemp fibres. The alkali-activated materials are environmental friendly building materials, which can be used as an alternative to ordinary Portland cement-based composites. Just like cement-based composites, these materials can be classified as quasi-brittle

Fracture mechanics based design of reinforced concrete beams-An analytical study

For a developing country like India, construction sector will be a governing factor in deciding the growth of the nation marching towards 2040. Growing infrastructure demands utilization of huge quantities of concrete. Concrete being quasi-brittle in nature is weak in tension which has got a tendency to crack when exposed to external loading. Steel is

Fracture properties of alkali activated mortars

In this paper, three different coal fly ash-based alkali activated mortars are studied. The three different mortars are obtained using the same binding system but different types (i.e. silica sand or expanded perlite) and sizes of aggregates. Small-scale beams are constructed together with additional specimens for material characterization. The small-scale beams are notched and loaded

Determination of fracture parameters of coral aggregate concrete after immersion in seawater

The fracture properties such as mode I and mode II fracture toughness and the critical strain energy release rate for different concrete-concrete jointed interfaces are experimentally determined using Digital Image Correlation technique. Interface beam specimens having different compressive strength materials on either side of a centrally placed vertical interface are prepared and tested under three-point

Complex evaluation of the mechanical and fracture properties of cementitious materials with different water-cement ratio

This paper is aimed at the development of the physical, mechanical and fracture characteristics of cementitious materials during ageing. Three mortars which differed only in the water-cement ratio (w/c) were prepared for manufacturing of the test specimens intended for the experiments. All mortars were prepared using the standardized quartzite sand with the particle grain size

A neural network ensemble for the identification of mechanical fracture parameters of Fine-grained Brittle Matrix Composites

The paper describes a method for the identification of selected mechanical fracture param- eters of fine-grained brittle matrix composites, and its software implementation. The artificial neural network-basedinverseanalysismethodcanbeemployedtoobtainparametersfromexperimentaldata acquired during three-point bending tests on notched prism specimens. This capability is utilized and extended in order to conduct parameter identification on fine-grained brittle matrix composites. Due to

A concurrent two-scale approach for high strength concrete

The present work proposes a concurrent two-scale (macro and mesoscale) approach for HSC, in which a linear elastic model with homogenized elastic properties is used for the macroscale and a three-phase material composed of coarse aggregate, mortar matrix and the interfacial transition zone (ITZ) with nonlinear behavior models are assumed for the mesoscopic level. The

Alteration of the Fracture Behavior in Host Rock during CO2 Geological Sequestration

Our research objective is to understand the evolution of the fracture behavior of host rock during CO2 sequestration. We focus our study on the Mt. Simon sandstone as part of the Illinois Basin Decatur Project, Illinois, USA. We conduct microscopic scratch tests, ion chromatography tests, environmental back-scattered secondary electron microscopy, and machine learning modelling on

Do you want to boost your business today?

This is your chance to invite visitors to contact you. Tell them you’ll be happy to answer all their questions as soon as possible.