Mixed Mode Fracture

This text briefly introduces the content in the page.

Microscopical Observation of Mode I Crack Propagation in Concrete Subjected to Fatigue

Fatigue tests were carried out on notched micro-concrete subjected to three point bending tests. Microscopic observations and length measurements were made by means of the replica technique associated with scanning electron microscopy (SEM). Observations of crack growth both on the surface and inside the specimens are compared with previous investigations in static tests. A “””‘-‘”JL,_…,,

Mode I Fracture Behavior of Natural Fiber Reinforced Concrete

The load-displacement diagrams of sisal fiber reinforced concrete (0.38%, 0.76% and 1.14% v/v of 30 mm long sisal fibers), were determined by notched cubic specimens and wedge splitting procedures. From the load- displacement diagrams, the fracture mechanics properties and softening diagrams were derived. Softening diagrams derived using the polylinear approximation analysis method for sisal fiber

Crack Surface Friction and Size Effect in Mode I Propagation for Mortar and Concrete

Scanning electron microscopy in conjunction with the replica technique gives a new insight of the fracture process zone in mode I crack propagation for mortar and concrete. Results lead to presume that during the crack opening, the across the crack surfaces is an important source of energy dissipation which can explain the size dependence which

Fracture Behavior of Concrete to Mixed Loading

In the first part of this paper, the crack extension in the center notched circular disk subjected to a diametral compression is nu- merically examined. The crack initiation from the notch tip is esti- mated by assuming that crack growth occurs in the direction along which the drop of total potential of tractions per unit

Mode I Fracture Behaviour of Recycled Concrete

load-displacement curves of concrete, which had been produced natural (NC) or with recycled concrete aggregate (RC), were determined cubic specimens and a wedge splitting procedure allowing stable crack growth. From the load-displacement curves, fracture mechanical data and the softening diagram were derived. The specific fracture energy of RC is 71.5 Nim, which is only 60

Further Studies of the Fracture Process Zone Associated with Mixed Mode Dynamic Fracture of Concrete

The fracture process zone associated impacted, three-point bend (TPB), precrack was analyzed by a hybrid finite element analysis. The crack “‘”””J.J.””‘ … dynamic mode I resistance, K1dyn, sliding resistance was undetectable resistance increased under this mixed …. , .. ‘”,,., 1 The fracture process zone (FPZ), as an “zone in which the material undergoes strain-softening

Do you want to boost your business today?

This is your chance to invite visitors to contact you. Tell them you’ll be happy to answer all their questions as soon as possible.